Digital Inkjet Flexo Printing Machine For Corrugated Carton Easy
WDR250-16A max production speed can be 820㎡/H;
|Printhead||Mirco-piezo hightest printhead|
|Printhead quantity||16 pieces|
|Ink type||Special water base dye ink|
|Printing resolution||≥180*360 dpi|
|Printing efficiency||Max 820㎡/hour|
|Printing format||Below 2500mm*1350mm under auto feeding|
|Drying speed||Liner-board can be dry once print out|
|Working environment||15ºC-32ºC Indoor,Humidity 20%-70%|
|Ink supply||Automatic ink supply|
|Feeding mode||Automatic feeding|
|Material thickness||2mm-35mm(max can be ordered to 50mm,if between 1.2mm and 2mm may
need manual feeding)|
|Operate system||Professional RIP system,professional printing system,Windows 7
system with 32 bit operating system|
|Power supply||About 15 KW power:AC380±10%,50-60HZ|
1.The whole machine is controlled by servo driven program in
2.All the position adjustment are charged by PLC, the coder
3.Each unit has equipped with touch-screen to make adjustment
accuracy which is convenient to operate.
4.The remote telemaintenance service is available.
1.Taking leading edge feeding technology to ensure feeding
precision, fast and it is suitable for all kinds of corrugated
2.Using dual rubber roller driven by servo-motor to delivery
without mechanical diffrence.
3.With air-operator adjustment function, the top feeding cylinder
coated abrasion proof rubber to keep the cardboard from distortion.
4.Vacuum suction lead edge feed and adjust the paper size as per
pressure of wind.
5.Installing suck removing dust machine to eliminate the odd on the
printing plate and improve the printing quality.
6.Adjust the feed unit space by manual.
7.three axis front edge paper sending unit with 11 kw blower fan,
suction to help sending paper, the air volume can be adjust
according to the cardboard degree of bend, frequency conversion air
volume adjustment, make sure to send paper smoothly. (using method
as show in the leading edge operation instruction)
8.The air volume is adjustable, sending paper dangling (paper
raise) system is controlled by cylinder. Equipped with dust removal
fan and the brush whish can eliminate impurities on the surface of
the cardboard, improve the quality of the printing.
9.Paper roll designed ahead and rear two-axis structure, ahead
paper shaft is pneumatic type elastic rubber roller which don't
destroy the strength of corrugated board, the inner rubber is soft
and outer is hard which are good stretching resistance and wear,
prolong service life, lower feed roller steel embossing plating
1.Wande 250 series digital printing machine, without plate, without
cleaning, using CMYK four source color printing mode, convenient,
environmental protection with low carbon.
2. The Printhead temperature system, can effectively overcome the
various low temperature environment.
3. Using stronger servo motor with high precision reducer, higher
precision, faster speed, more stable performance.
4. Use 6 grade super high precision gear and high precision
cylindrical grinding power roller, drive more accurately.
5. Strong rail beam, Mute guide rail,Printing flat error less than
0.2mm, makes the print more stable and higher accuracy.
6. New printhead cleaning mode, automatic cleaning,saving ink,
printing more frequency.
7.Print on-demand without creating waste ink,thus achieving lower
consumption and better environmental protection.
8. Rapid for the orders change. Lower printing cost to run from 1+
sheet. Instant service to the customer for rush orders.